Enquiry:
We would like to know if you have a facility for diesel fuel testing services based in Qatar.
One of our competent lab wouuld be carrying out diesel fuel analysis in Qatar.
Qatar
Enquiry:
We would like to know if you have a facility for diesel fuel testing services based in Qatar.
One of our competent lab wouuld be carrying out diesel fuel analysis in Qatar.
Enquiry:
Please send us your quotation for the testing of our Frozen Shrimp in Qatar.
Below are the complete product description and test parameters for your reference, please do advise the collection charges as per the given collection address.
Description:
Item No. 1 – Farm Raised IQF Frozen White Shrimp HLSO Ez Peel 16-20/lb
Item No. 2 – Farm Raised IQF Frozen White Shrimp HLSO Ez Peel 21-25/lb
Item No. 3 – Farm Raised IQF Frozen White Shrimp HLSO Ez Peel 31-35/lb
Item No. 4 – Farm Raised IQF Frozen White Shrimp PD Tail On 21-25/lb
Item No. 5 – Farm Raised IQF Frozen White Shrimp PD Tail Off 41-50/lb
Test Parameters:
1. – Organoleptic
2. – Volatile basic nitrogen (TVB-N)
One of our ISO certified and competent lab for seafood and non-seafood testing would be carrying out this analysis.
Enquiry:
With reference to subject inquiry, we request you to submit your competitive offer for the scope defined below.
Scope of Work
Parameters to be analysed
| S.No | Description |
| 1 | Temperature |
| 2 | Color |
| 3 | PH |
| 4 | Electrical Conductivity |
| 5 | TDS |
| 6 | Caustic-Alkalinity |
| 7 | BOD (5Days) |
| 8 | COD (Oil Layer) |
| 9 | COD (Water layer) |
| 10 | BOD (Oil Layer) |
| 11 | BOD (Water layer) |
| 12 | Oil & Grease ( oily layer ) |
| 13 | Oil & Grease (water layer ) |
| 14 | Total SS |
| 15 | Chloride(as Cl) |
| 16 | Sulphate(as SO4) |
| 17 | Sulphide(as Sulphur) |
| 18 | Cynide(as CN) |
| 19 | Detergent(LAS as MBAS) |
| 20 | Grease & Oil (Total) |
| 21 | Grease & Oil (Hydrocarbon) |
| 22 | Grease & Oil (Non-Hydrocarbon) |
| 23 | Arsenic(as As) |
| 24 | Barium(as Ba) |
| 25 | Tin(as Sn) |
| 26 | Iron(as Fe) |
| 27 | Beryllium(as Be) |
| 28 | Boron(as B) |
| 29 | Manganese(as Mn) |
| 30 | Phenolic compounds |
| 31 | Fluoride(as F) |
| 32 | Cadmium(as Cd) |
| 33 | Chromium(as Cr), (Trivalent and Hexavalent) |
| 34 | Copper(as Cu) |
| 35 | Lead(as Pb) |
| 36 | Mercury(as Hg) |
| 37 | Nickel(as Ni) |
| 38 | Selenium(as Se) |
| 39 | Silver(as Ag) |
| 40 | Zinc(as Zn) |
| 41 | Metals in Total |
| 42 | Chlorine(as Cl2) |
| 43 | Phosphate(as PO4) |
| 44 | Calcium(as Ca) |
| 45 | Magnesium(as Mg) |
| 46 | Nitrate(as NO3) |
| 47 | Sulfide |
| 48 | Phenol |
One of our ISO certified laboratory would be conductin this oil mixed water testing.
Enquiry:
Gear oil analysis for 18 samples, upon study of the result, we will be deciding on further quantities, in line with we are refloating this RFQ with required quantity as per below, kindly quote us your offer.
One of our highly competent and ISO certified lab in Qatar would be taking over this project.
Enquiry:
We would like to request a quotation for oil analysis with categories as follows:
| Item # | Category | Test | Qty |
| 1 | Fluid properties | Viscosity, acid/base number, elemental analysis | 1 lumpsum |
| 2 | Contamination | Particle counts, moisture analysis, elemental analysis | |
| 3 | Wear Debris | Elemental Analysis |
If you have clarification please don’t hesitate to contact me to clear any of your inquiries.
One of our ISO certified and accredited laboratory in Qatar would be dealing with this analysis.
Enquiry:
Kindly send quotation for below mentioned requirement.
1. Testing of water sample 1.1 liter phase 1 storage tank
2. Testing of water sample 1.1 liter phase 2 storage tank
One of our highly competent and ISO certified lab in Qatar would be taking over this job.
Enquiry:
Please note that we would like to know if the analysis facility for Oil Quality is available in your laboratory for the below listed parameters, as we need to know the price of each test as under :
One of our ISO certified and accredited lab in Qatar would be taking over this job.
Enquiry:
Please find the following table for your kind consideration. Kindly quote us your best price with a delivery date for the following.
See attached specs
Please provide the following terms and conditions:
FOLLOWING AREA’S ANDNUMBER OF TEST POINTS ARE:
A. HOSPITAL BUILDING – WATER TESTING AND RECOMMENDATIONS AS FOLLOWS:
(TOTAL OF 136 TEST POINTS)
• STEAM BOILER
• HOT WATER (HEAT EXCHANGER) CHEMICALS
NOTE:
LEGIONELLA – 1 SAMPLE POINT IS EQUAL TO 1 LITER VOLUME OF SAMPLE
PSEUDOMONAS – 1 SAMPLE POINT IS EQUAL TO 500 ML. VOLUME OF SAMPLE
C. SAMPLING BOTTLES AND PPE’S SHOULD BE SUPPLY BY THE CONTRACTOR.
D. WATER SAMPLE COLLECTED SHOULD BE SENT TO LABORATORY AFTER 2 HOURS
FROM TIME OF COLLECTION FOR TESTING.
E. LABORATORY TESTING COMPANY SHOULD BE APPROVED BY MOPH FOR TESTING
OF LEGIONELLA AND PSEUDOMONA
One of our ISO certified lab would be taking over this contract as per Muncipality specifications & ISO standards.
Enquiry:
With reference to subject inquiry, we request you to submit your competitive offer for the scope defined below.
Scope of Work
Below detailed parameters to be analysed for the sample oil.
| Oil Analysis of transformers | ||
| Sl.No | Description of parameters to be tested | Remarks |
| A | Dissolved Gas Analysis | |
| 1 | Hydrogen (H2) ( ppm) | |
| 2 | Methane (CH4) (ppm) | |
| 3 | Ethane (C2H6) (ppm) | |
| 4 | Ethylene (C2H4)(ppm) | |
| 5 | Acetylene (C2H2) (ppm) | |
| 6 | Carbon monoxide (CO) (ppm) | |
| 7 | Carbon dioxide (CO2) (ppm) | |
| 8 | Nitrogen (N2) (ppm) | |
| 9 | Oxygen (O2) (ppm) | |
| 10 | TDCG (ppm) | |
| 11 | Rate change per day | |
| 12 | Rate change per year | |
| B | Oil Quality Analysis | |
| 13 | Sample temp. (°C) | |
| 14 | Moisture ( ppm) | |
| 15 | Moisture corrected to 20(°C) | |
| 16 | % Saturation | |
| 17 | % Saturation Interfacial Tension (mN/m) | |
| 18 | Acidity (mgKOH/g) | |
| 19 | Colour number | |
| 20 | Visual | |
| 21 | Dielectric BDV (kV) | |
| 22 | Power factor % @ 25°C | |
| 23 | Power factor % @ 90°C | |
| 24 | Specific Gravity | |
| 25 | Viscosity | |
| 26 | Sediment & sludge | |
| 27 | Density | |
| 28 | Particles | |
| 29 | PCB | |
| 30 | Corrosive Sulphur | |
| 31 | DBDS | |
| C | Furan Analysis | |
| 32 | 5-hydroxy-methyl- 2-furfuraldehyde (5HMF) (ppm) | |
| 33 | 2-furfuraldehyde (2FAL) (ppm) | |
| 34 | 2-Acetylfuran (2ACF) (ppm) | |
| 35 | 5-methyl- 2-furfuraldehyde (5MEF) (ppm) | |
| 36 | 2-fufuryl Alcohol (2FOL) (ppm |
Note: :
– Sample to be Collected at Site
– Containers for collecting the sample to be provided by the contractor
– Detailed reports shall be produced within 7 – 10 days of the collection
– Any recommendation or report shall be advised on the oil analysis.
– Any Parameter is not feasible or you can recommend for alternative as per Transformer maker recommendations
| S No | Substation Name | Transformer Number | Hz | Transformer Rating | Voltage | Type | Remarks | |
| 1 | Substation – | Transformer – 1 | 50Hz | 50/60 MVA | 132/11 KV | Oil | ||
| 2 | Transformer – 2 | 50Hz | 50/60 MVA | 132/11 KV | Oil | |||
| 3 | Substation – | Transformer – 1 | 50Hz | 900W | 415/30V | Oil | ||
| 4 | Transformer – 2 | 50Hz | 3200W | 415/40V | Oil | |||
| 5 | Transformer – 3 | 50Hz | 3200W | 415/40V | Oil | |||
| 6 | Transformer – 4 | 50Hz | 2700W | 415/30V | Oil | |||
| 7 | Transformer – 5 | 50Hz | 2700W | 415/30V | Oil | |||
| 8 | Transformer – 6 | 50Hz | 2700W | 415/30V | Oil |
One of our highly capable and competent lab will be taking over this contract.
I’m writing this email in connection with obtaining some information regarding the Determination Food Nutrient Content of our Restaurant Foods (multiple items) .
We are planning to determine the Nutritive Facts for our restaurant food items.
Please find the Details relevant for you to start the Process.
Please send your quotation regarding the Analysis as per our specification.
One of our best accredited and ISO certified lab would be taking over this food testing project.