• Home
  • Archive by category "Oman"

Category: Oman

Oman

Sea Sediment Analysis in Muscat, Oman

Posted by: Chemist Posted on: May 18, 2023

Enquiry:

Can we have your quotation for Sea Sediment Analysis, for the following parameters:
• Faunal Analysis
• Redox Potential
• Particle size analysis
• Carbon and Nitrogen contents
• Heavy metal analysis including copper, lead, and cadmium levels

Kindly please inform us if your laboratory can perform this testing and if so, please prepare a quotation from your end.

———-

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].



HSFO and Refinery Feedstock Testing in Duqm, Oman

Posted by: Chemist Posted on: May 17, 2023

Enquiry:

With reference to the above subject matter, we are looking for the following test for our Duqm Project –

Fuel Oil (HSFO) and refinery oil feedstocks for H2S content – using Seta H2S Analyzers and test method IP-570 (ASTM D-7621), providing important fuel hydrogen sulfide data for safer storage and transportation.

The IP-570 test method is the only test method allowed in ISO-8217 for determination of H2S in fuel oil.

Please let us know your interest to perform the test. If you find this fall under your scope of work, you are requested to please provide your commercial terms & conditions in detail with sample collection, duration of conducting the test & time frame of provision of result at the earliest.

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Water Testing in Muscat, Oman

Posted by: Chemist Posted on: March 5, 2023

Enquiry:

I would like to request a quote for a water analysis including the following measurements:

pH [-]
EC [mS/cm]
TDS [ppm]
ORP [mV]
Cation Mg, Si, Ca, K, Fe, Na[mg/L]
Anion Cl, Br, NO3, SO4[mg/L]
DIC [mmol/L]
DO  [mg/L]

One of our highly proficient and ISO certified laboratory would be taking over this job.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Carpet Quality Testing

Posted by: Chemist Posted on: February 21, 2023

Enquiry:

We need a quality test of parameters of carpet samples from an  ISO 17025 accredited laboratory. 

The test parameters are attached excel (Carpet Test Protocol). So you are kindly requested please let us know can you do the testing for all attached parameters of excel file from an ISO 17025 accredited laboratory.  

Test NameTest Standard No.Requirements according to label or
item requirements
1 Marking / LabellingGSO 365 / SASO 687:1994
GSO 863 / SASO 1173:1997		1- Name of the Product
2- Manufacturer’s Name &/ or TradeMark
3- Dimensions
4- Fiber Composition
5- Total Thickness in mm
6- Country of origin
7- Mass/square meter
2 Fiber compositionAATCC 20: 2018
AATCC 20A: 2018		 
3 Total ThicknessSASO-GSO-536:1994 
4 Total Weight
   Mass OF Sq. Meter (Gram)		SASO-ISO-3801:1977 
5 Abrasion resistanceISO 12947-2:2016 
6 Color Fastness To LightISO 105-B02:2014 
7 Color Fastness To Rubbing (Dry)SASO-ISO-105-X12:2016 
8 Determination of PHSASO-ISO-3071:2020 
9 Formaldehyde ContentSASO- ISO-14184-1:2011 
10 Cleavable Aryl ArylaminesTextile: ISO 14362-1:2017
Leather: ISO 17234-1:2015
4-aminoazobenzene confirmation:
Textile: ISO 14362-3:2017
Leather: ISO 17234-2:2011		 
▪Carcinogenic DyesISO 16373-1/ SASO ISO 16373-2/ SASO ISO 16373-3 
▪Allergenous DyesISO 16373-1/ SASO ISO 16373-2/ SASO ISO 16373-3 
11 Chlorinated organic carrierDIN 54232 
12 Extractable heavy metals (Sb, Pb, Cd, Cr, Co, Cu, Ni, Hg)Textile: EN 16711-2:2015
Leather: ISO 17072-1:2019
Cr (VI) for leather material: ISO 17075-1:2017		 

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Foam Sample analysis AFFF 3percent in Muscat, Oman

Posted by: Chemist Posted on: February 15, 2023

Enquiry:

Please provide your offer for below

DESCRIPTION

Foam Sample analysis (AFFF 3% ) testing and certification

Foam Sample analysis (Low expansion Foam 3% ) testing and certification

Scope of work and foam certificate is attached.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Engine Oil testing (Gas genset) in Oman

Posted by: Chemist Posted on: February 9, 2023

Enquiry:

We need to do engine oil testing. Pl find attached oil test method.

Viscosity at 100 °c (mm2/s) Total base number TBN (mgKOH/g) Total acid number, TAN (mgKOH/g) iph value Water (% by vol.) Glycol (mg/kg) Oxidation (A/cm) Nitration (A/cm) Wear elements (mg/kg): Iron (Fe) Lead (Pb) Aluminum (Al) Copper (Cu) Tin (Sn) Silicon (Si) Test method ASTM 0445 DIN 51562 ASTM 02896 ISO 3771 ASTM 0664 ASTM 07946 ASTM 06304 EN 12937 ISO 6296 ASTM 02982 DIN 51453 DIN 51453 DIN 51399-1/-2 Llmit values for Series 4000 Max. 17.5 Min. 11.5 Min. 2.5 and TBN > TAN max. new oil value +2.5 Min. 4 Max. 0.2 Max. 100 Max. 20 Max. 20 Max. 30 Max. 20 Max. 10 Max. 20 *** Max. 5 Max. 15* Llmit values for Series 400 New oil value +30 % ** New oil value -60 % ** On request from factory Min. 4 Max. 0.2 On request from factory Max. 30 Max.30 Max.50 Max. 30 Max. 20 Max.50 Max. 15 Max. 10 *

  • The limit value for the wear element Si only refers to natural gas operation.
  • * New oil value can be requested from the factory
  • * * During the 1st oil change (max. 3000 op. hrs.), the limit value is 50 ppm.
    Table 2: Limit values for used gas engine oils SAE 40
    Used-oil analysis
    The results of the oil analyses must be archived.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Petcoke witnessed testing in Sohar, Oman

Posted by: Chemist Posted on: December 6, 2022

Enquiry:

We have samples drawn from the ultra-low sulphur Petroleum coke consignment which mostly likely   sustained seawater damage. We would intend to perform the following testing:

The samples are currently in Sohar (Oman). We would be very grateful for your advice on the suitable laboratory in Oman where the above testing could be performed and  witnessing is  allowed.

Your soonest response would be greatly appreciated.

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].

Transformer Oil Analysis in Oman

Posted by: Chemist Posted on: November 24, 2022

Enquiry:

I want to enquire your services for transformer oil tesing. We have 33kV 6.3MVA transformers at site and we want to carryout the test mentioned below:

1. Breakdown Voltage Test

2. Dissolve Gas analysis Test

3. Water Content in Oil

I want to let you know that we have around 89 Transformers at our site and we want to perform their oil tests in different batches. Like in the first batch we would like to do testing for 10 Transformers. 

So I want the best quotation, that attract us in terms of price, from your side. 

Case 1: Quotation when we deliver Oil sample to your lab

Case 2: Quotation when your team come to site and take the sample and do the testing at lab.

case 3: Quotation when your team come to site and take the sample and do the testing at site

One of our highly proficient and ISO certified laboratory would be taking over this testing.

Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].