Enquiries about inspection, testing, calibration and product purchases.
Enquiry:
ENQUIRY FOR TRANSFORMER OIL TESTING
Kindly quote us your best price for the below item :-
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We need testing of our Lubricant oil as per given testing standards , Kindly share quotes for the same.
GSO 1180:2021
SASO GSO ISO 4925:2024
GSO 1180:2021
SASO GSO 1785-2:2024 — Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline and Diesel Engines. This has been adopted as a mandatory Saudi standard.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Can you please provide a quote for water testing in a domestic apartment for drinking water and shower?
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I am currently developing a dietary supplement brand, and I will shortly be receiving samples of our three formulations.
We would like to have the samples tested primarily to verify the authenticity, identity, composition, and declared quantities of the ingredients in the finished products.
The main purpose of the testing is to ensure that what is actually present in the products corresponds to what has been declared by the manufacturer, and that the stated active ingredients are present at the expected concentrations.
We will be providing 100 g samples of each SKU.
SKU 1 – Collagen Beauty Formula
SKU 2 – Ashwagandha Calm Formula
SKU 3 – Berberine Metabolic Formula
Testing requested
Could you please advise us on the appropriate analytical testing required to verify the above formulations, particularly:
Please also let us know if there are any additional tests you recommend for these products from a safety or regulatory-compliance perspective.
Quotation
Could you please provide us with:
Our priority at this stage is to ensure that the finished products genuinely contain the ingredients and quantities specified in the formulation, before proceeding with the commercial production and launch of our brand..
Thank you, and I look forward to your recommendations and quotation.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Could you perform a destructive pull-to-failure test on the 5-inch drill pipe body, or conduct a sample test in accordance with API standards?
Pipe Tensile Strength Testing.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Sampling and Analysis of Pressurised Process Fluid (Gas Stream) from Upstream Air cooler
Qty: 1 CYLINDER.
1. Purpose
The purpose of this Scope of Work is to investigate the process fluid upstream of Air Cooler to determine the presence and quantity of water in the stream and evaluate its potential contribution to corrosion and deposition issues. The investigation will also confirm the presence of elemental sulfur and all spectrum composition, quantify and characterize any solids present, and provide information to support equipment integrity assessment and future mitigation actions.
2. Objective
The external laboratory is requested to perform a detailed analysis to
determine:
• Determine the water vapour content of the overhead gas upstream of Air Cooler using ASTM D5454 or an equivalent validated method. Report the result in ppmv and mg/Sm³ or lb/MMscf, as applicable.
• Determine whether elemental sulfur and all spectrum elemental present in the process fluid.
• Determine process gas composition using Gas Chromatography. to support phase behavior modelling and identification of potential hydrocarbon and water condensation locations between the Stabilizer Overhead tower until Downstream cooler.
• Determine or calculate the water dew-point temperature at the actual operating pressure and at agreed reference pressures. The basis, method, software or equation used shall be stated in the report.
• Quantify and characterize any suspended solids. using XRD method.
Determine total
particulate / solids loading in the process gas using a validated filtration (Example pore
0.45 or 1 micron) and gravimetric method. Report results in mg/m³.
• Identify the chemical composition and structure of the solids.
3. Sample Information
• Sample Type: Pressurized process fluid sample (gas stream).
• Source Location: Upstream of Air Cooler • Facility: PF-1 Stabilizer System • Special Requirement: Sample shall be collected under pressure and protected from air exposure during sampling, transportation, and laboratory handling to prevent oxidation and sulfur formation.
4. Required Laboratory Tests
4.1 Fluid Characterization
• Water content determination.
• Visual inspection for solids and sulfur deposition.
• Confirmation of elemental sulfur presence, if any.
4.2 Solids Analysis
If solids are present:
• Total solids quantification.
• Chemical composition analysis.
• Structural/mineralogical analysis using suitable analytical techniques such as XRD, SEM-EDS, FTIR, or equivalent.
• Identification of corrosion products, sulfur species, salts, and other inorganic compounds.
5. Reporting Requirements
The final laboratory report should include:
• Water content results.
• Confirmation of elemental sulfur presence or absence.
• Quantity of solids identified.
• Detailed chemical and structural characterization of solids.
• Interpretation of solids formation mechanism.
• Raw data + interpreted results in PDF and Excel formats
1. Timeline & Deliverables
• Turnaround Time: 2 – 4 weeks starting from sample submission.
• Deliverables:
• Full analysis report (PDF)
▪ Raw analytical data (Excel)
▪ Any supporting images (FTIR, XRD patterns)
2. Third-Party Laboratory Requirements
• The laboratory shall:
▪ ISO 17025 accreditation. The third-party laboratory shall be accredited to ISO/IEC 17025 for the applicable analytical methods. Where a required analysis is outside the laboratory’s accredited scope, this shall be clearly declared in the technical proposal and final report.
▪ Review the scope and analytical requirements.
▪ Lab shall provide a detailed description of the analytical procedures or reference to Standards and analytical schedule for review ▪ Lab shall also communicate to the minimum required sample volumes / quantity.
3. Reporting
• Final report including:
o Executive summary.
o Detailed findings per sample.
o Tables, graphs, and chromatograms
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We would like to conduct transformer oil testing as per the below-mentioned tests. Kindly provide your quotation.
Your early response will be highly appreciated.
Annual 3rd Party Transformer Oil Testing
A)Transformer’s oil DGA as per ASTM D 3612 and IEC 60567 for following key gases (06 Samples)
1) Hydrogen.
2) Oxygen.
3) Nitrogen
4) Methane
5) Carbon Monoxide
6) Ethane
7) Carbon Dioxide
8) Ethylene
9) Acetylene
B) Water Content, D1533 IEC 60814 with relative saturation (06 Samples)
C) Dielectric BDV, IEC 60156 (06 Samples)
D) Furanic Compounds in Oil/ Paper Degradation (06 Samples)
E) Acidity, IEC 62021 (06 Samples)
F) Dissipation Factor @ 90°C, IEC 60247 (06 Samples)
G) Inhibitor Content, IEC 60666 (06 Samples)
H) Sulfur-Potentially Corrosive, IEC 62535 (06 Samples)
I) Passivator in Oil, IEC 60666 (06 Samples)
J) Methanol and Ethanol, Doble (06 Samples)
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please provide your best quotation for conducting inspection and testing of our 22kg LPG cylinder in accordance with ISO 22991:2004 requirements.
The required tests are as follows:
Please let us know if you require any additional information or supporting documents.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
we have 3 nos of compressors using in ammonia refrigeration plant need to do oil analysis, we have collected samples, kindly send quotation.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are a water factory located in Dubai and we are looking to perform a self-heat test for the carbon media.
Attached report for the reference.
Please let us know if you can do the test in UAE
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].