Enquiry:
I write to get some information about your services in crude oil Testing such as (Antioxydant activity, Tocopherol, Sterol..).
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I am reaching out to discuss the possibility of collaboration with your esteemed organization as an ADNOC Certified Lab. We are an oilfield services company based in Abu Dhabi, specializing in well intervention services for ADNOC.
To facilitate our operations, we would need an approval letter from your side to designate you as our official lab for future requirements, including scale analysis, oil sample tests, and other related services requested by ADNOC.
We believe this partnership will ensure the highest standards of service and compliance with ADNOC’s requirements. Please let us know the process or any further information needed to proceed.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We would like to ask if you are analyzing the following parameters with norms and methods, on product crude oil (petroleum category):
Kinematic Viscosity at 40 °C [cSt] – 2≤V≤100 – ISO 3104:1994
Density at 15 °C [kg/m³] – max 991 – ISO 12185:1996
Sulphur [% mass] – max 0.05 – ISO 8754:03
Total Sediment Existent [% mass] – max 0.05 – ISO 10307-1:09
Water by Distillation [% vol] – max 0.20 – 3733:99
Micro Carbon Residue [% mass] – max 0.30 – ISO 10370:14
Ash [% mass] – max 0.02 – ISO 6245:01
Flash Point [°C] – min 100 – ISO 2719:16
Cooper Corrosion at 50 °C for 3 hrs – max 1b – ASTM D 130:18
Acid Number [mgKOH/g] – max 12.0 – ASTM D 664:17a
Strong Acid Number [mgKOH/g] – 0 – ASTM D 974:14a2
Iodine Number – <140 – ISO 3961:13
Chloride [mg/kg] – <10 – UOP 779:08
Total Mercury [mg/kg] – <0.2 – with reference to AOCS Ca 17-01
Arsenic [mg/kg] – <0.1 – with reference to AOCS Ca 17-01
Silicon (as Si) [mg/kg] – max 10 – with reference to AOCS Ca 17-01
Phosphorus (as P) [mg/kg] – max 80 – with reference to AOCS Ca 17-01
Calcium (as Ca) [mg/kg] – max 50 – with reference to AOCS Ca 17-01
Alkaline Content (Na+K) [mg/kg] – max 30 – with reference to AOCS Ca 17-01
Vanadium (as V) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Chromium (as Cr) [mg/kg] – <1 – with reference to AOCS Ca 17-01
Nickel (as Ni) [mg/kg] – <0.5 – with reference to AOCS Ca 17-01
Lead (as Pb) [mg/kg] – <0.1 – with reference to AOCS Ca 17-01
Cupper (as Cu) [mg/kg] – <0.4 – with reference to AOCS Ca 17-01
Antimony (as Sb) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Selenium (as Se) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Tellurium (as Te) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Thallium (as Tl) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Tin (as Sn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Manganese (as Mn) [mg/kg] – <1.0 – with reference to AOCS Ca 17-01
Cadmium (as Cd) [mg/kg] – <0.2 – with reference to AOCS Ca 17-01
We would be waiting for your reply and comments.
Please note that if you are using different methods, it would be acceptable for us.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I came across your website (https://www.accreditedtestlabs.com/testing/crude-oil/) and I would like to inquire about the Lab Testing Analysis for our client.
I have attached the required lab testing analysis, let me know if you can support us regarding this.
| NO | ITEM DESCRIPTION | UOM |
| 1 | Lab wet analysis (i.e. Composition Analysis) -per crude sample or deposit | per sample |
| 2 | SARA analysis – per crude sample or deposit | per sample |
| 3 | Melting point – per crude sample or deposit | per sample |
| 4 | Compatibility test of formulation with production chemicals – per sample batch of production chemical | per sample |
| 5 | Compatibility test/emulsion test with crude oil – per sample of crude | per sample |
| 6 | PH test – per sample | per sample |
| 7 | Corrosion coupon and determination of corrosion rate- per sample | per sample |
| 8 | Bottle test (Antifoam/Deoiler) – per chemical sample | per sample |
| 9 | Qualitative scaling test – per water sample | per sample |
| 10 | Quantitative scaling test – per water sample | per sample |
| 11 | Oil and Grease concentration in water – per water sample | per sample |
| 12 | Complete Water Analysis | per sample |
| 13 | XRD/XRF – Mineralogy analysis for clay content | per sample |
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We wanted to know if you can perform these analyses on oils:
SARA – Iatroscan TLC-FID
FTIR- whole oil
If so, can you provide prices, TAT, and required sample amounts?. How we could send the samples to your lab.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are Contacting you from a contracting Company located in Abqaiq. We are one of the bidders for Sample Laboratory Analysis for Pipelines .We kindly request you to provide us with your Budgetary Commercial Proposal for the Mentioned Line Items in the SOW. Please provide us with your quotation on or before 29/Jan/2024. Refer to the Attachment above and If you need any additional information or drawing, Please feel free to contact me.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
I have a client (contract) for subject to include three tests;
Above to be done on daily basis (5-10 samples) every day for a period of six months and might extent. Lab to be in Jubail city in Saudi arabia.
Looking forward to confirming availability and price for each sample.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
We are looking to get below crude oil testing’s done in Qatar, please advise weather these can be tested at your laboratories.
If so please kindly do pricing and approximate testing durations.
One of our highly proficient and ISO certified laboratory would be taking over this job.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Kindly send us offer for the following analysis.
| Chemical Analysis Test Required on Crude Oil: Carbon, Hydrogen, Nitrogen, Sulphur, Water Ration & Ash. | Job | 1 |
| Chemical Analysis Test Required on HFO: Carbon, Hydrogen, Nitrogen, Sulphur, Water Ration & Ash. for HFO 380, Analysis Test | Job | 1 |
Thanks
One of our highly proficient and ISO certified laboratory would be taking over this testing.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].
Enquiry:
Please quote your best price and delivery time for the below requirement
Price validity required is for 3 years from April 2022
Sample Collection & Delivery – Kuwait
One of our highly proficient and ISO certified laboratory would be taking over this testing.
Should you have any similar requisites, do drop us email and we shall revert instantly -> [email protected].